• If you haven't done so already, please add a location to your profile. This helps when people are trying to assist you, suggest resources, etc. Thanks

Bass side register slider locked up. Fixed.

32251

Active member
Joined
Nov 9, 2023
Messages
134
Reaction score
234
Location
Lilburn ga 30047 usa
Switch would not move the slide bar under the Reed bank. Removed the bank and managed to remove the slide. I think there is a bit of warpage in the channel. Anyway I decided to open up the channel a tiny bit and see if I could fix the issue, took a thin foot long rule and wrapped it with 120 sand paper. Used a couple of small wood pieces to squeeze onto the thin sandpaper covered rule and gradually opened up the slot just enough for the slide bar to move freely. Works fine now.
 

Attachments

  • IMG_2024.jpeg
    IMG_2024.jpeg
    289.8 KB · Views: 10
  • IMG_2025.jpeg
    IMG_2025.jpeg
    234.5 KB · Views: 10
Back
Top